MALOSSI Vespower Ignition With Cone ø 20 And Flywheel 1,2 kg Piaggio / Vespa 50-125cc 67-17

Features:

• Lightened flywheel (weight 1,2 kg) with moment of inertia equal to 28 Kg/cm² (see attached chart). It is made from forged with external set up for additional masses (not included into the kit).
• 12 V (90 Watt ) 4-pole stator with output for battery charging.
• Red colored plastic fan with advanced booster cooling secondary fins (optimized fan profile and distribution absorption).
• Wiring dedicated to each specific application.
• Integrated coil/control unit.
• Voltage regulator: attention - is only provided in some models.

Fits:

PIAGGIO APE 50 2T <-1989 To ensure proper operation it is necessary to modify the electrical system. In order to use the electric starter, art. 6718653 shall be installed (to be purchased separately).   PIAGGIO APE FL2 50 2T 1990->1995 To ensure proper operation it is necessary to modify the electrical system. In order to use the electric starter, art. 6718653 shall be installed (to be purchased separately).   PIAGGIO APE FL3 50 2T 1996->1999 To ensure proper operation it is necessary to modify the electrical system. In order to use the electric starter, art. 6718653 shall be installed (to be purchased separately).   PIAGGIO APE FL 50 2T 1989->1990 To ensure proper operation it is necessary to modify the electrical system. In order to use the electric starter, art. 6718653 shall be installed (to be purchased separately).   VESPA ET3 Primavera 125 2T You need to replace all the lamps (from 6 to 12 V), respecting original power expressed in Watts.   VESPA Primavera 125 2T For proper fitting you have to modify the ignition wiring supplied into the kit. - You need to replace all the lamps (from 6 to 12 V), respecting original power expressed in Watts.