MOTOGADGET Mo Flasher/Wave Digital Flasher Relay

By far the smallest load-independent flasher relay on the market. It couldn’t be smaller or simpler and completely replaces all conventional flasher relays. If you are looking for a flasher relay with automatic shut-off, we recommend choosing the mo.stop.

The relay is ultra-small and lightweight - practically just a short piece of cable with a tiny, candy-sized module. This makes it ideal for custom motorcycles and projects with very limited installation space. Bulky standard flasher relays or load resistors are no longer required. The module can be installed inside the handlebar tube, frame tube, or directly within the wiring harness.

The relay operates using fully digital semiconductor technology and is controlled by a microprocessor - with no mechanical parts, coils, or contacts. It provides a constant and precise flashing frequency, making it suitable for almost all turn signals: LED indicators, micro indicators, halogen indicators, 10 W and 21 W turn signals. It works with both four turn signals or two handlebar-end indicators.

Connection is extremely simple, using only two cables connected in series. The relay is almost completely load-independent (minimum 1 W), generates no heat during operation, and offers high reliability.

The module is fully encapsulated, making it waterproof and vibration-resistant, and features short-circuit protection as well as automatic overload protection. Maximum switching power is up to 100 W. Operating voltage ranges from 5-18 V and it is also suitable for 6 V turn signals.

Technical data

• Housing dimensions (L × W × H): 18 × 13 × 9.5 mm

• Connection cable length: approx. 2 × 50 mm

• Weight: approx. 4 g