Blue Sea ST Blade Split Bus Fuse Block

Split Bus Fuse Block with ground for use when a mix of switched and 24-hour circuits are desired in the same block

Provides two isolated groups of six ATO®/ATC® circuits
For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits
Screw terminals for securing wires accept ring terminals
One-piece stainless flange nuts ensure safe and secure connections
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements
Easy to open, push button latch for easy access to fuses
Tin-plated copper buses and fuse clips
Fuses sold separately

Specifications
Circuits    12
Maximum Amperage Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application.    30A per circuit
100A total not to exceed 80A per load group
Maximum Voltage    32V DC
Mounting    #8 Screw (M4)
Negative Bus    #10-32 Stud
Positive Bus    #10-32 Stud
Recommended Torque    24 in-lb (2.71 N·m)
Screw Terminal Torque    18 in-lb (2.03 Nm)
Screw Terminal Type    #8-32 Screws with captive star lock washer
Weight    0.75lb (0.34 kg)