RFX Pro Fork Air Bleeders M4x0.7 (Orange) WP

RFX Pro Series fork bleeders allow you to remove the excess air form both original cartridge and modern dual chamber forks (Please note not for use with air forks). This allows for proper operation of the forks as excess air makes the forks feel harder than normal and can eventually lead to the seals failing.

 Features:

• Ensures proper fork operation.
• Quick installation.
• No tools required to operate once installed.
• CNC aerospace grade billet aluminium.
• Colour anodised for that factory look.
• RFX laser etched logo.
• Tested by top UK race teams.

Installation instructions:

• Make sure that the motorcycle is on the counter, with the front wheels raised above the ground.
• Remove the original fork, clean it with the air release screw, so that dirt does not get inside.
• Unscrew the original air bleed screw using a suitable screwdriver / Torx key.
• Install the new RFX Pro Series air bleeder, making sure the O-ring is over the threads.
• Tighten the screw until the rings are against the fork cover.
• Make sure that the air release device is not pressed against any fasteners.
• Carefully tighten the 10 mm screw, being careful not to break the aluminum threads.