THUMBS UP inner tube repair kit

The set includes:
8ml glue
Screw to clean the hole
Screwdriver for inserting the pin into the tyre
Pluggings to fix holes in a tyre

Repair manual with repair kit:
1. Mark the tyre damage area with chalk, then remove the nail or other foreign object stuck in the tyre.
2. Using the auger, clean the hole, remember to clean the angle of the hole.
3. Wrap the pin around the middle of the needle. Then firmly insert the pin into the puncture hole so that the pin passes through all layers of the tyre. so that the pin should protrude about 1 cm above the tread (if necessary, cut off the excess with a knife).
4. Pull the spike out of the tyre sharply, avoiding twisting the spike as this may break it.
5. Cut the excess wire with a knife as close to the tread as possible.
6. The wheel is ready for use, you just need to inflate it.
7. A main focus is that the tool must be inserted at the same angle as the damaged tyre.