MOTOGADGET Mo-Stop Digital Brake Light Modulator

Adjustable, digital brake light modulator to increase riding safety: various flashing modes turn the standard brake light into a conspicuous warning light. Especially for custom bikes and conversions with very small or low-lying brake lights.

Use as brake light control

• Ultra small and lightweight, practically just a piece of cable with a tiny candy-sized device
• Routing in the wiring harness simply in series with the brake light
• 6 different light/flashing variants adjustable for brake light
• Virtually load-independent - therefore suitable for almost all LED brake lights (from 1 W) or conventional brake light bulbs
• Super simple connection using just two cables - simply connect in series
• Short-circuit-proof - Automatic overload protection - Protection against voltage peaks from the vehicle electrical system
• No heat generation during operation
• Also suitable for 6 V brake light
• Immediate, loss-free response of the brake light - waterproof and vibration-proof  

Use as flasher relay (with/without cut-off)

• Almost load-independent (from 1 W)
• Always constant flashing frequency, therefore suitable for almost all LED turn signals (from 1W), all micro turn signals, halogen turn signals, 10 watt turn signals, 21 watt turn signals, etc.
• Ideal for custom bikes and conversions with limited space - no bulky standard relay
• Works e.g. with 4 indicators or 2 handlebar end indicators etc.
• Super simple connection using just two cables - simply connect in series
• Also suitable for 6 V indicators
• Adjustable as flasher relay with automatic switch-off

Features:

• Housing L x W x H: 26 mm x 12 mm x 10 mm
• Length of connection cable: approx. 2 x 50 mm
• Weight: approx. 6 g